Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
Charles Burnette Posted: Wednesday, July 8, 2009 6:20:20 AM(UTC)
 
Thanks! I was putting more of the probe against the terminals than needed.
I was able to get steady readings for all thermostats at .1 and assume that means they are OK. I'll order a heating element since the readings were above the manufacturer's ranges.
Charles
richappy Posted: Tuesday, July 7, 2009 4:12:00 PM(UTC)
 
Try it on clean surfaces, that's why they use pointed probes!
Charles Burnette Posted: Tuesday, July 7, 2009 7:29:46 AM(UTC)
 
Having trouble getting stable Ohm readings on thermostats and heating element with new digital multimeter. Readings fluctuate wildly even tho components are isolated. Set at 200ohms. Looking for ranges from 68-82 and 24-35 on the heating element but getting readings in 130 +s. What am I doing wrong? Why won't the reading stabilize? Thanks for your advice. Charles

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET