Is my stove burner switch bad.
If yes, which is a replacement part # because you don't list one.

I checked the burner ohms and it was 40 to 100 I don't remember
I checked the continuity and did not get a reading
So the burner is good.

With switch in OFF position:
Ground to H1 shows 10 volts
Ground to H2 shows 120 volts
Ground to P shows 17 volts
Ground to L1 shows 240 volts

With swith in ON position:
Ground to H1 shows 10 volts
Ground to H2 shows 120 volts
Ground to P shows 240 volts
Ground to L1 shows 240 volts

Since H1 and H2 go to the burner leads 120 volts won't make it work.

Please help.