Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Post a reply

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
denman Posted: Monday, April 20, 2009 6:08:30 PM(UTC)
You could check the wiring for continuity with a meter.

Since you cannot hear the relay click I would say that the defrost control board is shot. Also by the process of elimination this is all that is left.
allemich Posted: Monday, April 20, 2009 8:33:55 AM(UTC)
I tried both ways on the tech sheet to force a defrost and could not get either way to work. The tech sheet says I should be hearing a relay click, but I did not. Where do I go from here?
denman Posted: Monday, April 20, 2009 1:27:28 AM(UTC)
Here are your parts
Replacement parts for WHIRLPOOL ED2FHAXSB03 |

Here is a tech sheet

It shows how to force a defrost.
If a forced defrost works then the defrost control board is shot.
allemich Posted: Sunday, April 19, 2009 8:02:07 PM(UTC)
I have a whirlpool refridgerator model ED2FHAXSB03 and I am having problems with the defrost system, it keeps frosting up causing the fridge to be too warm. The defrost heater has resistance and I have already changed the defrost thermostat, but I am still having problems. Is there a way to know if my control board is bad, or is there something else I should be looking at?