Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Last 10 Posts (In reverse order)
Gene	Posted: Wednesday, September 7, 2011 12:57:58 PM(UTC)
	I'm glad you found the right way to install it and it's up and running. Gene.
worccx	Posted: Saturday, September 3, 2011 1:39:23 AM(UTC)
	testing???
worccx	Posted: Thursday, September 1, 2011 5:46:50 PM(UTC)
	testing this thread
worccx	Posted: Thursday, September 1, 2011 2:18:59 PM(UTC)
	Any thoughts?
worccx	Posted: Thursday, September 1, 2011 4:43:44 AM(UTC)
	Gene: SER: R00921369 Thanks, Chuck
Gene	Posted: Tuesday, August 30, 2011 3:05:32 PM(UTC)
	What is the serial number of the range? It's written in the installation instructions that this instructions cover some models but not all of them. Gene.
worccx	Posted: Tuesday, August 30, 2011 2:45:39 PM(UTC)
	I see your online do you have any advice on the installation?
worccx	Posted: Tuesday, August 30, 2011 2:44:49 PM(UTC)
	No longer confused. I figured out how to read, it's the serial date code once I researched that on line my oven does not fall under that so all I had to do was replace part and turn on. Very simple for you guys but not for a novice like me.
worccx	Posted: Friday, August 26, 2011 5:23:17 AM(UTC)
	Gene: Confused and lost. I've got the board installed and removed and taped off the red wire from the original board but can't locate the jumper to remove. It says: "3. A jumper located at the power cord connection must be removed. (This connection is located at the right rear area of the storage drawer/warming drawer compartment)" I have the storage drawer removed and don't see anything that makes sense. Can you give me any further instructions. Thanks, Chuck
Gene	Posted: Saturday, August 20, 2011 5:05:34 PM(UTC)
	No, it does not need any special tools and the new part comes with the instructions. Gene.

Notification