|
You are welcome Pastor Ken. We are glad you were able to fix it.
Gene.
|
|
Originally Posted by: Pastor Ken When the oven is set, after a few minutes the preheat signal sounds but the oven element has never come on. And the oven is not hot. This began after a lighting storm where I had other problems so after checking a few things I replaced the control panel. Same thing. What next? I couldn't find a thermostat on the cutaway and the element (new this spring) appears to be fine. Like you, I could not find a thermal fuse or hi limit switch on or in your range diagram. Most free standing ranges do not have them. I take for granted when you "checked a few things" you also checked for burnt or damaged wires to the element ? and that both breakers set and supplying power to your range. When you select broil on your control panel, does the upper element come on and heat? with a new control board and if the broil element does come on and heat, this would be a good indication of a damaged wire between your control board and bake element. If neither element comes on and heats, it would be an indication of a power loss on one of your 120 volt lines to your range(outlet ,breaker,wiring or power cord) and may require an electrician to diagnose and repair as needed.
|
|
Got it! The element was severed behind the wall in the insulation. We're back in business. Thanks.
KN
|
|
Originally Posted by: Pastor Ken ...1/ I replaced the control panel...
...2/ the element (new this spring) appears to be fine... 1/ I'm assuming you replaced the control board (aka a clock)? 2/ Have you checked the heating element for continuity? Does the Broil work? Gene.
|
|
When the oven is set, after a few minutes the preheat signal sounds but the oven element has never come on. And the oven is not hot. This began after a lighting storm where I had other problems so after checking a few things I replaced the control panel. Same thing. What next? I couldn't find a thermostat on the cutaway and the element (new this spring) appears to be fine.
|