Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=sidfink43;895835]If you machine is really less than one year old it should be under factory warranty.  If not, try switching the hot and cold connectors at the inlet valve.  If hot water comes in instead of cold and no cold water comes in when it calls for hot then the problem is that 110volts is not getting to the valves.  This could be the temp selection switch or the timer/control unit.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
sidfink43	Posted: Tuesday, January 12, 2016 5:14:20 PM(UTC)
	If you machine is really less than one year old it should be under factory warranty. If not, try switching the hot and cold connectors at the inlet valve. If hot water comes in instead of cold and no cold water comes in when it calls for hot then the problem is that 110volts is not getting to the valves. This could be the temp selection switch or the timer/control unit.
dennisstimpson	Posted: Sunday, January 10, 2016 12:06:02 PM(UTC)
	regardless of what I select, only cold water will run into washer

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close