Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Last 10 Posts (In reverse order)
Simon / APP Team	Posted: Thursday, July 12, 2012 4:56:35 PM(UTC)
	You are welcome. Simon.
imotay	Posted: Thursday, July 12, 2012 4:48:57 PM(UTC)
	I bought the temperature control board and installed it today. Problem has been corrected. ATC is now functioning as it should Thanks for all of the help and suggestions
Simon / APP Team	Posted: Tuesday, July 10, 2012 3:18:57 PM(UTC)
	Hi. Sorry for the inconvenience, it's not always easy to diagnose the problem from the distance. After double checking I think it's the ATC board Part number: 27001208 You can return the other parts. Thank you. Simon.
imotay	Posted: Tuesday, July 10, 2012 1:55:35 PM(UTC)
	I replaced the mixing valve. So now the switch and valve have both been replaced and the issue has not been resolved. Any other suggestions?
Simon / APP Team	Posted: Friday, July 6, 2012 10:05:27 AM(UTC)
	Hi. Most likely there is a bad water mixing valve Part number: 40107001 Here are the breakdown diagrams and Replacement parts for Maytag SAV515DEWW WASHER-TOP LOADING \| AppliancePartsPros.com Thank you. Post the results. Simon. PS. You can always return any unused parts even if they been installed.
imotay	Posted: Friday, July 6, 2012 6:23:04 AM(UTC)
	My washer has the ATC function. ATC has 3 settinsg (hot, warm, cold). The is also a cold setting for NON ATC setting. Currently the temperature is the same (hot) no matter what selection is made in ATC mode. When I turn to NON ATC mode (cold), the water is cold. I have replaced the ATC switch and that did not correct the issue. I have been told that it could be valve in the back and have been told that there is no way the valve is the issue sice the cold works when I turn it to cold (in non ATC mode). Not sure if I should replace the valve or if I am missing something else. Any suggestions will be appreciated...Thanks

Notification