Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=libertyappl;35488]To replace the lid switch, you need to raise the top. There should be 2 clips, about 2 inches in from the corners, use a putty knife to release the clips(push straiht in until it releases). Once you have the top raised you can change the lid switch. Hope that helps
Nat[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
libertyappl	Posted: Monday, September 22, 2008 7:28:43 PM(UTC)
	To replace the lid switch, you need to raise the top. There should be 2 clips, about 2 inches in from the corners, use a putty knife to release the clips(push straiht in until it releases). Once you have the top raised you can change the lid switch. Hope that helps Nat
rmsedan	Posted: Monday, September 22, 2008 1:25:54 PM(UTC)
	I Need Help On Opening The Cabinet On My Washer I Don't Know How To Do It. I Don't No Where To Look For The Screws To Take Off The Control Panel. I Have To Get To The Lid Switch And Replace It. Any Help Would Greatly Be Appreciated.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close