Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
steeler82 Posted: Saturday, June 21, 2008 2:50:34 PM(UTC)
 
no, but man...it is crack all over, has separations all the way to the outter strap. I can't believe it hasn't snapped. thx.
abadfish66 Posted: Saturday, June 21, 2008 2:33:49 PM(UTC)
 
If it's slipping it could. Is it glazed (shiny)
steeler82 Posted: Saturday, June 21, 2008 2:32:40 PM(UTC)
 
I sprayed WD 40 on shaft, no change. The belt is in really bad shape, could it cause this noise? thx.
abadfish66 Posted: Saturday, June 21, 2008 2:21:32 PM(UTC)
 
Most likely it is going to be either your drain pump may have something in it causing it to screech, or the pulley for the belt, if it is the pulley squirt some oil on the shaft and see if the noise goes away
steeler82 Posted: Saturday, June 21, 2008 12:58:24 PM(UTC)
 
I have a top loading amana model #LWA50AW. Makes loud screeching noise while agitating, spinning, and emptying water. Sound does not occur during water filling. I removed front panel, sounds like it coming from pump or motor right in the front. Leaning towards the pump. I grabbed the belt and can turn it in either direction.

Any advice on how to check further? I also noticed the belt has lots of separations in it all the way to the outter strap, so I will have to figure out how to replace it too. Thanks.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET