|
Guess this topic is dead. Perhaps I'll try another ice maker.
Thanks for the suggestions.
|
|
Freezer is 0 degrees
Bin is there
Door switches are depressed (like i am)
There is no arm on the ice maker
|
|
Message was deleted by a User. | Reason: Not specified
|
|
A couple of things that stop ice production.
Its got to be cold enough. Somewhere around 0 to 10 degrees F.
The ice bin needs to be in place.
The door switches need to be depressed, as they would be when the door is shut.
The ice bail arm needs to be down in the on position.
I hope this helps.
|
|
Well... I jumped the pins on the sensor board, left it for 48 hours, and...
Nothing.
|
|
Thanks, TG.
The sensor appears to be working as designed, but I'll run the jumper wire on the plug and see if it cycles.
|
|
|
|
Well... that was anticlimactic.
|
|
Yes.
|
|
does the tray heat?
|