|
DL - Make sure the freezer door is closing properly, make sure it's level and the seal is making good contact all the way around. Also what is the temp inside the freezer?
Nat
|
|
Well I did replace the gasket and it's not much improved. Thinking of opening a ski lift in there!!!
Seriously though frost is building up like never before. Fridge is 10 years old or so, and nothing has changed so far as I know, but maybe there's some secret hole in it?
Other ideas?
|
|
My problem is solved, replaced the parts. As to Larry Digital problem, I would go with replacing the door gasket.
|
|
Originally Posted by: Digital Larry I have TBH18DAX, but no ice dispenser installed. Recently, also have begun to get a great deal of frost accumulation in ice cube compartment and left top edge of freezer door. As far as I know all other systems are go... it's plenty cold. Only issue I'm aware of is fridge compartment door gasket is broken out at the bottom. Thx ! DL Broken gasket allowing warm moisture laden air inside.
|
|
I have TBH18DAX, but no ice dispenser installed.
Recently, also have begun to get a great deal of frost accumulation in ice cube compartment and left top edge of freezer door.
As far as I know all other systems are go... it's plenty cold. Only issue I'm aware of is fridge compartment door gasket is broken out at the bottom.
Thx!
DL
|
|
You really pointed me in the right direction. The dispenser door part appears worn, so I ordered it. I also determined that the solenoid that controls the door was not activating. It was all rusted and dirty. I ordered it as well. Thanks, I'll let you know how it works out.
|
|
Keep us posted! Nat
|
|
Thanks, I'll give it a try.
|
|
Sorry for the misunderstanding...I was referring to the little dispenser door part # WR17X11653, it's about $5
|
|
Are you talking about the rubber around the inside of the freezer door? Is there a part number?
|