Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Last 10 Posts (In reverse order)
Gene	Posted: Tuesday, September 11, 2012 6:06:13 PM(UTC)
	It looks to me like the same part failure. Gene.
richwest41	Posted: Tuesday, September 11, 2012 5:01:57 PM(UTC)
	The last time I had problems the oven would beep and the unit would stop cooking. We would have to shut it down at the circuit box and reset it numerous times to get it to go back on again. Also, on some occasions we would get an F-24 error code.
Gene	Posted: Tuesday, September 11, 2012 12:40:17 PM(UTC)
	Originally Posted by: richwest41 ...I replaced part number AP3851310 which I believe is the display but seems to also be referred to as a control board, about a year and a half ago... What was the problem at that time? Sounds like this part failed again. Quote: ...Also do they normally go bad this often?... Normally any part should last much longer but... Gene.
richwest41	Posted: Monday, September 10, 2012 5:14:58 PM(UTC)
	I replaced part number AP3851310 which I believe is the display but seems to also be referred to as a control board, about a year and a half ago. Is this the part you suggest I replace. Also do they normally go bad this often? Thanks for your help Originally Posted by: Simon / APP Team Hi. Most likely the problem is with the display board. Here are the breakdown diagrams and Replacement parts for Thermador C271U BUILT-IN OVENS \| AppliancePartsPros.com Simon. PS. You can always return the part even if it's been installed.
Simon / APP Team	Posted: Wednesday, August 22, 2012 5:24:02 PM(UTC)
	Hi. Most likely the problem is with the display board. Here are the breakdown diagrams and Replacement parts for Thermador C271U BUILT-IN OVENS \| AppliancePartsPros.com Simon. PS. You can always return the part even if it's been installed.
richwest41	Posted: Wednesday, August 22, 2012 4:10:05 PM(UTC)
	Sometime when cooking the oven randomly will shut off. Usually after 15 minutes or more. The display panel remains on but the cooking mode shuts down. This happens most frequently when we open the oven to check on the item cooking than close the door. Would appreciate any ides.

Notification