Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
denman Posted: Monday, June 23, 2014 1:37:55 AM(UTC)
 
Here are your parts
Parts for Whirlpool RF262LXSQ4 Range - AppliancePartsPros.com

See the attachment for the tech sheet.

If the oven shows that it is ready then it may be an oven sensor problem.
Below is a link on how to check it, look at 7, 8, 20 and 21.
http://www.applianceaid.com/ele...-range-repair-topics.php

If OK check that the wiring to the elements is OK.

Since you said that the broil element works and I am assuming so do the stove top elements your power is OK.

If everything above checks out then I would replace the control board (item 12 in section 02).
THIS FORUM IS DEAD!!!!!!!
king1 Posted: Monday, June 23, 2014 1:12:54 AM(UTC)
 
I unplugged the unit for about a hour no help .checked element it is ok. what should I try next?
denman Posted: Sunday, June 22, 2014 10:55:54 AM(UTC)
 
First thing to try is unplug it or remove power from it for a couple minutes to see if it will reset.

Also more info on what is happening would be helpful.

When in bake and preheat the unit switches back and forth between the bake and broil elements so it could be that it is just a bad bake element.
THIS FORUM IS DEAD!!!!!!!
king1 Posted: Sunday, June 22, 2014 5:11:19 AM(UTC)
 
My oven stop working yesterday it will not heat up. A couple of times the broil as but the control was set in bake . it will not do the self clean.What should I try?

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET