|
Hi Gene, I have the same issue of a door that will not stay closed. I sense one of the springs is weak. With the door removed they both feel equal in tension. I have reinstalled the door with the same issue. Should the locking lever be in the A position as shown or does it lay down flush inside the door?
|
|
Hi, I am having the same problem wit hmy Viking 30" stove. The door wont close all the way. How did you fix this?
|
|
Originally Posted by: Gene You have to move the lever "A" to position "B" to lock the hinge. Grab the door with both hands and lift it up to release the door hinges.
Gene. Thanks. I got that far (door off)--now how do I remove the old hinges from the stove?
|
|
Originally Posted by: Gene You have to move the lever "A" to position "B" to lock the hinge. Grab the door with both hands and lift it up to release the door hinges.
Gene. Gene: My viking looks identical to the one pictured here, but am still need help. When oven door is fully open, it is difficult to get hold of the levers to pull them up as suggested. But when pulling up on the door when it is opened 20 degrees, the left lever pops up by itself, but the right does not. In fact the oven door feels like it will come off on the right side without even locking the lever. What's happening. Thanks,
|
|
Yeah, I have the same issue with a 30" vgic viking. Even after reading the above posts, and looking at the pictures, I cannot get the door off any better than the previous two posters.
Does anybody know how to get these doors off?
Thanks for your help.
|
|
Read all previous posts. Maybe you'll get some ideas. Otherwise there is no on-line information for a Viking products.
Gene.
|
|
does anyone know how to repair/ replace the door hinges on a viking range oven door ? I have the 36" gas range (model vgic3654qss) and the repair guy wants to charge me $900 to replace the door hinges-- HELP !!
|
|
As far as I know - no. They are not adjustable.
Gene.
|
|
I have the same problem, and was able to remove the door. I think the left hinge may be a bit weak at the final closed position. Can I adjust it?
|
|
Looking at the previous pictures, most likely the door has to be disassembled in order to replace the gasket.
Gene.
|