Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
denman Posted: Thursday, June 18, 2015 2:37:04 AM(UTC)
 
Here are your parts
Parts for Frigidaire AEQ8700FE0 Dryer - AppliancePartsPros.com

Here is the tech sheet.
http://manuals.frigidaire.com/p...r/134682200ts_wd_EFS.pdf

Did you check the parts to determine that they were bad before replacing them or did you just replace them?

Have you checked the power.
The heater requires the full 240 volts.

Try flipping the breaker off/on slowly a couple times. Sometimes you can loose half the line without actually tripping the breaker.
Check the voltage at the plug
L1 to L2 should be 240 volts
L1 to Neutral and L2 to Neutral, both should be 120 volts.
If OK
Unplug the unit and check the wires at the terminal strip in the machine to make sure none are loose or burned out
If OK
Check the power at the terminal strip.
Do this with the heater off and on.
[COLOR="Red"]Be careful as 240 volts is lethal !!![/COLOR]
THIS FORUM IS DEAD!!!!!!!
Elarde Posted: Thursday, June 18, 2015 1:17:00 AM(UTC)
 
Just replaced the limiter fuse and heater assembly/thermostat but still not heating up. Dryer runs okay but no heat. I need help. Thank you

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET