|
You were correct. All I needed was the coils. The valve is on its way back to you guys- Thanks for all of your assistance with my dryer. Tiff
|
|
Hi.
All you need is the control coils set. You may return the valve if you got it from APP.
Thank you. Post the results.
Simon.
|
|
Simon, The ignitor switches on and glows but within a few seconds it goes out. The dryer will continue to spin as the ignitor runs through that same process. Parts replaced were the ignitor assembly, t- stat outlet, thermostat safety and the inlet control thermostat. Those parts were changed because I thought that was part of the problem but when I opened the back of the machine the ignitor was noticeably broken- Possibly from it trying to ignite over and over???? I did use the multimeter pre replacement and after replacement. Before replacing the parts I drew 3 amps after replacing those parts I drew 5.7 amps. Yesterday, I ordered the gas valve, dual and main coil- Could this be the solution or am I replacing parts for nothing? Thank you for your time and effort in resolving my dryer problems!! Tiff
|
|
Hi.
Please be more detailed. Does the ignitor comes on and switches off? What parts did you replaced and why? Do you have the multimeter?
Thank you.
Simon.
|
|
My GE front load dryer quit drying my clothes last week. I replaced the three switches and a glow coil from you guys that did not fix the problem. I was thinking about changing the gas valve and the two coils, What do you suggest?:o
|