|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Amana Slow to Fill |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
05-10-2010, 10:12 AM
|
|||
|
|||
Amana Slow to Fill
Model Number: LW3503W2 Brand: Amana Age: More than 10 years
Our washer if very slow to fill. I replaced the water hoses and verified that we have water pressure at the washing machine. Is there a valve / controller that can be replaced?
Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
05-10-2010, 10:27 AM
|
|||
|
|||
|
Your water mixing valve may be clogged or restricted by calcium or other mineral deposits.
|
|
05-10-2010, 01:17 PM
|
|||
|
|||
|
Also could be a partially plugged filter screen on the input side of the water valve.
If it is dirty clean it do not remove it permanently from the unit as it is there to keep crud out of the valve which could hold it open and cause a flood. I am assuming you checked the hoses by running them into a pail. Sometimes hose can de-laminate internally and greatly reduce the flow even though there is still pressure at the ends.
__________________
- Last edited by denman : 05-10-2010 at 01:19 PM.
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Washer Slow Fill | markstl | Washer Repair | 5 | 08-12-2010 05:36 PM |
| Slow fill rate | atcapecod | Dishwasher Repair | 0 | 04-26-2010 09:10 AM |
| Slow fill | William Wittman | Washer Repair | 1 | 09-23-2009 06:33 AM |
| Slow cold water fill | skirven2 | Washer Repair | 1 | 04-25-2008 10:17 PM |
| Washer is slow to fill | Dbowls | Washer Repair | 1 | 08-30-2007 02:22 PM |
Linear Mode
