Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
BillandJeanne  
#1 Posted : Tuesday, March 9, 2010 2:58:17 PM(UTC)
Quote
BillandJeanne

Rank: Member

Groups: Registered
Joined: 3/9/2010(UTC)
Posts: 2

WE purchased a new timer, but cant seem to get the timer control knob off. Any suggestions?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Wednesday, March 10, 2010 5:54:22 AM(UTC)
Quote
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Look on your replacement timer and see if the shaft is threaded, which it should be.

In that case push in the old knob and turn it counter clockwise to take it off.
BillandJeanne  
#3 Posted : Wednesday, March 10, 2010 8:37:31 AM(UTC)
Quote
BillandJeanne

Rank: Member

Groups: Registered
Joined: 3/9/2010(UTC)
Posts: 2

:( the timer knob is not threaded.
sidfink43  
#4 Posted : Wednesday, March 10, 2010 9:55:16 AM(UTC)
Quote
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Ok, well look on the back of the timer and see if there is a tab which when pulled out will release the knob. The picture of your timer does not show this but maybe the pic is wrong. There may also be screws or tabs which hold it on from the back.

If that is not the case look for a clip between the timer knob and the console facing.

If both of these do not work, I am at a loss until I have a model like yours in front of me.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.