|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Washer will not spin, just loud buzz |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: GSQ9300EQ0 Brand: Whirlpool Age: 1 - 5 years
Washer will properly fill, but just "buzzes" instead of pumping out water.
Ads By Google Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
|
|||
|
Thanks for your help. Now the pump is working and pumping out the water, but will not go through cycles. (nothing in pump). It also is overfilling, (on small load, water fill to top of basket) and will not go into agitate or spin. Still just buzzes loudly. Could the motor be jammed or stuck? It's direct drive, the first thing I looked for was a belt off.
Thank you... |
|
|||
|
Start by checking the tube from the basket to the water level pressure switch. Clean it out and try again. That may fix your filling problem, but if the machine will still not go into agitate take the motor off and see if it runs while in spin mode (with the lid switch by-passed). Your problem can be the motor, capacitor, transmission, brake assembly or timer so you need to try to narrow it down.
__________________
- |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Washer Spin Cycle Very Loud | dradspin | Washer Repair | 4 | 07-02-2010 11:03 AM |
| washer loud spin cycle | rottweiler | Washer Repair | 4 | 01-10-2010 09:09 AM |
| GE Washer, Loud Spin and Leaks | Partmiser | Washer Repair | 1 | 10-29-2009 04:27 PM |
| Washer makes loud buzz and shuts off. | Willow09 | Washer Repair | 1 | 04-15-2009 09:34 PM |
| Loud Buzz | fpapia | Microwave Repair | 0 | 08-30-2007 07:13 PM |