Discuss

Washer will fill, however, doesn't agitate or spin out - just "clicks".

 in

Washer Repair

. "

Yesterday, the machine was fine. Today, I filled it (small tub) but it would not agitate. I checked to see

..."
 
 
Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Appliance Repair Help > Washer Repair » Washer will fill, however, doesn't agitate or spin out - just "clicks".

Reply By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use.
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 05-17-2008, 10:35 AM
dottiedd dottiedd is offline
Junior Member
 
Join Date: May 2008
Posts: 2
dottiedd is on a distinguished road
Question Washer will fill, however, doesn't agitate or spin out - just "clicks".
Model Number: A510   Brand: Maytag   Age: More than 10 years   

Yesterday, the machine was fine. Today, I filled it (small tub) but it would not agitate. I checked to see if it would spin (did not) therefore, will not empty. It just "clicks" as it does when timing to next cycle, but nothing happens.

The serial #, I believe, is on the back of the machine, and I cannot move it to find it. Will this make it more difficult to select part #?
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
VIEW DIAGRAMS AND PHOTOS, ORDER PARTS

powered by AppliancePartsPros.com
  #2 (permalink)  
Old 05-24-2008, 05:45 AM
dottiedd dottiedd is offline
Junior Member
 
Join Date: May 2008
Posts: 2
dottiedd is on a distinguished road
Default

Quote:
Originally Posted by dottiedd View Post
Yesterday, the machine was fine. Today, I filled it (small tub) but it would not agitate. I checked to see if it would spin (did not) therefore, will not empty. It just "clicks" as it does when timing to next cycle, but nothing happens.

The serial #, I believe, is on the back of the machine, and I cannot move it to find it. Will this make it more difficult to select part #?
**
The serial # is 435092, Model A510, Series 01
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
VIEW DIAGRAMS AND PHOTOS, ORDER PARTS

powered by AppliancePartsPros.com
Reply



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Agitator makes loud "smashing sound" during spin cycle Spug Washer Repair 3 04-06-2008 05:43 PM
A "how to" on repairing a maytag atlantis washer vincom Washer Repair 1 01-25-2008 05:54 AM
Washer makes "CLUNKING" noise after spin cycle. apetty Washer Repair 3 01-22-2008 01:33 PM
Kenmore (Whirlpool) washer "bang" noise when spinning dadasmatta Washer Repair 2 12-22-2007 07:34 PM
Older Kenmore washer appears "dead"! Cappy Washer Repair 0 10-27-2007 07:18 PM


All times are GMT -7. The time now is 02:54 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.0.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15