Rank: Member
Groups: Registered
Joined: 5/13/2008(UTC)
Posts: 2
|
Our washer is 2 1/2 years old. Just before the 2 yr. warranty was up, the lid switch became so loose, when I shut the lid, I had to press down on the back corner so it would make contact. A tech came and tightened it, so it worked fine. Now it's loose again, and I really don't want to pay $75 for another tech to spend 30 seconds tightening it again.
Can someone tell us how and what to tighten? Do we need to remove the top? He didn't take the top off. He just reached underneath the lip of the top, and tighened something. But it was out of sight. He did it by feel. But I'm not sure we could manage that.
Any help is great appreciated.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/31/2008(UTC)
Posts: 322
|
You will first need to take the console loose and filp it upward, see pics below. The last picture is a breakdown of your machine. The lid switch is number 11,. Make sure all screws #8 and 22 are tight. glen65 attached the following image(s):
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/13/2008(UTC)
Posts: 2
|
Thank you so much for the information. We'll tackle it this weekend.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
