Rank: Member
Groups: Registered
Joined: 11/12/2009(UTC)
Posts: 3
|
i have checked the lid switch it works fine
washer does not spin
the motor tries to move but it moves very very slow
it gives burning smell
the drain pump is working
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
Take off the belt and see if the motor runs freely in spin mode. Then see if your transmission will turn easily without the belt. If not, something is hung up in the transmission or brakes (which are inside the transmission).
If the transmission and motor are ok, the problem may be in the clutch, but it is more likely the transmission/brake unit is bad.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
