[CCS FIXER]

WP model LSR7233BQ1

Washer agitates great but when it comes to pumping out the water and spinning it stops and has a loud buzz sound. It doesn't matter what wash cycle it's the same thing. I checked the lid switch and it works fine, checked the pump for a clog and it was clear has a burn smell also

[Gene]

Remove the washer cabinet and check all wires at the motor harness plug. Check the motor capacitor (#26 on the diagram).

Post the results.

Here is the Tech sheet.

Here are the breakdown diagrams and Replacement parts for WHIRLPOOL LSR7233BQ1 | AppliancePartsPros.com

Gene.

[richappy]

If you leave the washer running in spin, does the buzzing sound go away?

[CCS FIXER]

NO it only buzzes when it gets to spin. No matter what cycle in agitates without any problem but as soon as it gets to spin it stops and has a buzz sound. I noticed after the second try ther was a burned smell not exactly rubber not exactly electric. I have not checked the capacitor yet but I have smelt burned capacitors before so that suggestion made sense. Will post what I find Thanks for the responses

[CCS FIXER]

I just checked the capacitor ohm 9.95

[richappy]

Seems like your start capacitor is bad.

[CCS FIXER]

Thanks If you guys think a capacitor is the problem I'll pick one up and try it

[CCS FIXER]

The new capacitor just got here, installed and.............................

NO change anyone have any other thoughts??

Thanks

[richappy]

Probably a bad timer, but without meter data, it's just a guess.

[CCS FIXER]

Give me an idea as to what and where to check and I will check it out

Thanks for the response