New Topic Post Reply

Dryer Inop Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: LDE9206ACE	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

JSLOAN4		#1 Posted : Saturday, January 9, 2010 1:21:41 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/9/2010(UTC) Posts: 4		Dryer Works Then Stopped Blowing Hot Replaced Heater Element Lasted 1 Week Then Inop Again Any Help
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

magician59		#2 Posted : Saturday, January 9, 2010 7:03:40 PM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Go here to see the parts breakdown, Heater replacement parts for MAYTAG LDE9206ACE Dryer - Ele | AppliancePartsPros.com, and look at the thermostats and thermal fuse. Check them for continuity. It's a good idea to replace them all as a set, even if just one of them is open.
User Profile View All Posts by User View Thanks

JSLOAN4		#3 Posted : Sunday, January 10, 2010 12:44:30 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/9/2010(UTC) Posts: 4		Thank You For Advice
User Profile View All Posts by User View Thanks

JSLOAN4		#4 Posted : Wednesday, January 13, 2010 5:45:02 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/9/2010(UTC) Posts: 4		Originally Posted by: JSLOAN4 Thank You For Advice CKD ALL FUSES FOR CONTINUITY ///CKD GOOD HEAT ELEMENT WAS REPLACED RIGHT AFTER I BOUGHT NOW OUT AGAIN (BOTH WERE USED) SELLER WILL NOT HELP I AT LEAST NEED ANOTHER ELEMENT BUT WHAT WOULD BE CAUSING REPEATED FAILURE :eek: :eek:
User Profile View All Posts by User View Thanks

JSLOAN4		#5 Posted : Wednesday, January 13, 2010 5:48:32 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/9/2010(UTC) Posts: 4		THANK YOU FOR PREVIOUS ADV ISE Originally Posted by: JSLOAN4 CKD ALL FUSES FOR CONTINUITY ///CKD GOOD HEAT ELEMENT WAS REPLACED RIGHT AFTER I BOUGHT NOW OUT AGAIN (BOTH WERE USED) SELLER WILL NOT HELP I AT LEAST NEED ANOTHER ELEMENT BUT WHAT WOULD BE CAUSING REPEATED FAILURE :eek: :eek:
User Profile View All Posts by User View Thanks

Quick Reply Show Quick Reply Security Image: Enter The Letters From The Security Image:

Users browsing this topic

Guest

New Topic Post Reply