Discuss

raise the washer top to the service position

 in

Washer Repair

. "

The Whirlpool manuel states "pry emblem off from front of washer trim and remove T-20 torx screws"

..."
 
 
Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Appliance Repair Help > Washer Repair » raise the washer top to the service position

Post New Thread  Reply By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use.
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 03-28-2008, 01:52 PM
hundeby hundeby is offline
Junior Member
  
Join Date: Mar 2008
Posts: 2
hundeby is on a distinguished road
Default raise the washer top to the service position
Model Number: 110.21064000   Brand: Kenmore   Age: 1 - 5 years   
The Whirlpool manuel states "pry emblem off from front of washer trim and remove T-20 torx screws" The Kenmore Calypso does not have an emblem on the front of the top.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
VIEW DIAGRAMS AND PHOTOS, ORDER PARTS

powered by AppliancePartsPros.com
  #2 (permalink)  
Old 03-28-2008, 04:28 PM
bambiblaster bambiblaster is offline
Senior Expert
APP Volunteer
  
Join Date: Mar 2008
Posts: 116
bambiblaster is on a distinguished road
Default
There are 2 push clips about 4 inches from left and right corners inward.. push them in and raise top... remove the clips while you work on it so when you lay top down for any reason it wont snap shut again on you
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 04-05-2008, 06:37 PM
hundeby hundeby is offline
Junior Member
  
Join Date: Mar 2008
Posts: 2
hundeby is on a distinguished road
Default
Quote:
Originally Posted by bambiblaster View Post
There are 2 push clips about 4 inches from left and right corners inward.. push them in and raise top... remove the clips while you work on it so when you lay top down for any reason it wont snap shut again on you
Thanks! it worked just great
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
VIEW DIAGRAMS AND PHOTOS, ORDER PARTS

powered by AppliancePartsPros.com
Reply

« loud whirring sound during spin cycle | kenmore washer not spining out all the time »


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Oven heating-knob in off position Britt Oven Repair (including Ranges and Cooktops) 0 02-16-2008 09:23 AM
Online service manuals cityservices Microwave Repair 2 12-24-2007 07:44 AM
Oven stays on with switch on the off position ivan coulombe Oven Repair (including Ranges and Cooktops) 1 11-27-2007 10:51 PM
Electric Dryer buzzes when in off position ChrisR001 Dryer Repair 6 11-03-2007 05:18 PM


All times are GMT -7. The time now is 03:18 PM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.0.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15