Washer Repair

Shayna · #1 (**permalink**) 03-27-2008, 02:30 PM

I turned my washer on the other day and walked away only to discover a few minutes later my floor flooded. This just started suddenly. Now I have to stand by and manually turn the cold water off at the valve after filling up and back on and off again for the rinse cycle. The hot water will stop running into the washer when it begins to agitate, but the cold continues to run. Someone told my boyfriend that it sounded like the cold water solenoid valve. I am wondering if that could be the problem and also if that is expensive and if we could possibly fix it ourselves.

bambiblaster · #2 (**permalink**) 03-27-2008, 05:17 PM

If tou unpuj the machine and the cold still comes in yes the inlet valve is bad.. Its not too hard to change... check this link for instructions

http://www.applianceaid.com/newlinks.html

toniarose · #3 (**permalink**) 02-11-2010, 03:57 PM

Sounds just like the problem with my crosley conservatorHelp me.Tonia

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
washer won't stop filling with water	oerck157	Washer Repair	2	06-04-2009 11:01 AM
Roper washer won't stop filling with water	jeffct	Washer Repair	2	11-11-2008 12:51 PM
crosley washer will not stop filling water to tub	ltsc	Washer Repair	0	07-08-2008 03:02 PM
Admiral washer won't stop filling up with water!	imcrazy73	Washer Repair	1	04-07-2008 07:14 PM
washer won't stop filling up on any water levels.	danielle92273@yahoo.com	Washer Repair	4	01-24-2008 10:07 AM

washer won't stop filling with water

Washer Repair

I turned my washer on the other day and walked away only to discover a few minutes later my floor