|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Old Maytag Perorma |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
01-06-2010, 05:15 PM
|
|||
|
|||
Model Number: pav2200agw Brand: Maytag Age: More than 10 years
The banging may be a suspension problem, or a brake problem but you can try replacing the thrust bearing, which is inexpensive and pretty easy to do.
Here is the part for doing that. AP4009132" target="_blank">Part number: AP4009132 AP4009132" target="_blank"> AP4009132"> With respect to the leak you are going to have to take off the front and watch for it. If it is in the center then it is probably time to replace the machine. This service manual will show you how to open it up. http://www.servicematters.com/maytag...s/16023083.pdf Ads By Google Related Models
__________________
- 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
