[fred973]

Our washer was incorrectly loaded (unbalanced load), and apparently after many attempts by the motor to move the load at the spinning cycle, the control board burned (we took what we think is the control board out of the machine, and we could clearly see where the circuit burned).

I have called the Maytag service center, and also have searched in the internet for the part number of this circuit, so I can buy it and replace it, but I cannot find it. I have used all reference numbers in the label of the circuit (see last picture), but have not been able to locate the part.

I moved out of the USA last year. I also had a local tecnical service trying to fix the problem, but they do not have the part available. Could you help me locating the part number, and let me know how could I buy it on the internet?

I attach 5 pictures for reference.

Many thanks,

Fred

[bambiblaster]

That is the motor control board Maytag updated this part to a new motor kit pt # AP3160609 Once this kit is installed you can buy motor or controler if it fails in the future seperatly.. but right now you need the kit.. Just click on the pt number above

[fred973]

Thank you very much for the prompt feedback

Originally Posted by bambiblaster

That is the motor control board Maytag updated this part to a new motor kit pt # AP3160609 Once this kit is installed you can buy motor or controler if it fails in the future seperatly.. but right now you need the kit.. Just click on the pt number above