Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
JOSH MANN  
#1 Posted : Monday, March 17, 2008 12:55:20 PM(UTC)
Quote
JOSH MANN

Rank: Member

Groups: Registered
Joined: 3/17/2008(UTC)
Posts: 2

what is wrong with the washer if it does not complete the cycles.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Matt S  
#2 Posted : Monday, March 17, 2008 2:44:24 PM(UTC)
Quote
Matt S

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/11/2008(UTC)
Posts: 66

This is kind of hard to diagnose without more information.

Is the machine stopping full of water, or empty? What cycle is it stopping in?

Give some more detailed information if you can. :)

Matt
JOSH MANN  
#3 Posted : Tuesday, March 18, 2008 11:52:12 AM(UTC)
Quote
JOSH MANN

Rank: Member

Groups: Registered
Joined: 3/17/2008(UTC)
Posts: 2

The washer is stopping full of water in the middle of the wash cycle while it is aggitating. We used to be able to pick the lid up and shut it again and it would kick back on, but now it will not start again at all. We have even tried to change the type of cycle when it stops like this... and even then only some cycles will work.
Matt S  
#4 Posted : Tuesday, March 18, 2008 1:00:46 PM(UTC)
Quote
Matt S

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/11/2008(UTC)
Posts: 66

Hmm, depending on exactly where it is stopping, you may have a bad lid switch.

You should be able to hear the lid switch clicking when you open the lid about an inch.

Does the lid switch click?

Matt
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.