Discuss

Maytag Neptune TL OD code

 in

Washer Repair

. "

The OD code continues to display after unplugging. Ran the service test but does not show anything but "OD" no

..."
 
 
Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Appliance Repair Help > Washer Repair » Maytag Neptune TL OD code

Post New Thread  Reply By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use.
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 11-30-2009, 10:29 AM
Junior Member
 
Join Date: Nov 2009
Posts: 3
Curiouscleaner is on a distinguished road
Default Maytag Neptune TL OD code
Model Number: FAV6800AWW   Brand: Maytag   Age: 5 - 10 years   

Appliance Parts from AppliancePartPros.com


The OD code continues to display after unplugging. Ran the service test but does not show anything but "OD" no other codes. Is it a sure bet that the control board is bad or would it have to due with the Magnetic closers? I do not wish to just replace board if their is an underlying cause. The board shows no signs of burn components. Read the repair manual but found no reference to this specific issue. Any help would be greatly appreciated.


Related Models
Maytag FAV6800AWW WASHER-TOP LOADING
Maytag FAV9800AWQ WASHER-TOP LOADING
Maytag FAV9800AWW WASHER-TOP LOADING
Frigidaire FAX050P7A1 Frigidaire/air Conditioner
Frigidaire FAX050P7A2 Frigidaire/air Conditioner
Frigidaire FAX050P7A3 Frigidaire/air Conditioner
Frigidaire FAX050P7A4 Frigidaire/air Conditioner
Frigidaire FAX050P7A5 Frigidaire/air Conditioner
Frigidaire FAX050P7A6 Frigidaire/air Conditioner
Frigidaire FAX050P7A7 Frigidaire/air Conditioner
Frigidaire FAX050P7A8 Frigidaire/air Conditioner
Frigidaire FAX050P7AENG1 Frigidaire/air Conditioner
Frigidaire FAX050P7AENG2 Frigidaire/air Conditioner
Frigidaire FAX050P7AENG3 Frigidaire/air Conditioner
Frigidaire FAX050P7AENG4 Frigidaire/air Conditioner
Frigidaire FAX050P7AENG5 Frigidaire/air Conditioner
Frigidaire FAX050P7AENG6 Frigidaire/air Conditioner
Frigidaire FAX050S7A11 ROOM AIR CONDITIONER
Frigidaire FAX050S7A12 ROOM AIR CONDITIONER
Frigidaire FAX050S7A13 ROOM AIR CONDITIONER
Frigidaire FAX050S7A14 ROOM AIR CONDITIONER
Frigidaire FAX050S7A15 ROOM AIR CONDITIONER
Frigidaire FAX050S7A16 ROOM AIR CONDITIONER
Frigidaire FAX050S7A17 ROOM AIR CONDITIONER
Frigidaire FAX050S7AA ROOM AIR CONDITIONER
Frigidaire FAX050S7AB ROOM AIR CONDITIONER
Frigidaire FAX050S7AC ROOM AIR CONDITIONER
Frigidaire FAX050S7AD ROOM AIR CONDITIONER
Frigidaire FAX050S7AE ROOM AIR CONDITIONER
Frigidaire FAX050S7AF ROOM AIR CONDITIONER
Frigidaire FAX051P7A1 Frigidaire/air Conditioner
Frigidaire FAX051P7A2 Frigidaire/air Conditioner
Frigidaire FAX051P7A3 Frigidaire/air Conditioner
Frigidaire FAX051P7A4 Frigidaire/air Conditioner
Frigidaire FAX051P7A5 Frigidaire/air Conditioner
Frigidaire FAX051P7A6 Frigidaire/air Conditioner
Frigidaire FAX052P7A1 Frigidaire/air Conditioner
Frigidaire FAX052P7A11 ROOM A/C
Frigidaire FAX052P7A12 ROOM A/C
Frigidaire FAX052P7A13 ROOM A/C
Frigidaire FAX052P7A14 ROOM A/C
Frigidaire FAX052P7A15 ROOM A/C
Frigidaire FAX052P7A16 ROOM A/C
Frigidaire FAX052P7A2 Frigidaire/air Conditioner
Frigidaire FAX052P7A3 Frigidaire/air Conditioner
Frigidaire FAX052P7A4 Frigidaire/air Conditioner
Frigidaire FAX052P7A5 Frigidaire/air Conditioner
Frigidaire FAX052P7A6 Frigidaire/air Conditioner
Frigidaire FAX052P7AA ROOM A/C
Frigidaire FAX052P7AB ROOM A/C
Frigidaire FAX052P7AC ROOM A/C
Frigidaire FAX052P7AD ROOM A/C
Frigidaire FAX052P7AENG1 Frigidaire/air Conditioner
Frigidaire FAX052P7AENG2 Frigidaire/air Conditioner
Frigidaire FAX052P7AENG3 Frigidaire/air Conditioner
Frigidaire FAX052P7AENG4 Frigidaire/air Conditioner
Frigidaire FAX052P7AENG5 Frigidaire/air Conditioner
Frigidaire FAX052P7AENG6 Frigidaire/air Conditioner
Frigidaire FAX054P7A1 Frigidaire/air Conditioner
Frigidaire FAX054P7A11 ROOM A/C
Frigidaire FAX054P7A12 ROOM A/C
Frigidaire FAX054P7A13 ROOM A/C
Frigidaire FAX054P7A14 ROOM A/C
Frigidaire FAX054P7A15 ROOM A/C
Frigidaire FAX054P7A16 ROOM A/C
Frigidaire FAX054P7A2 Frigidaire/air Conditioner
Frigidaire FAX054P7A3 Frigidaire/air Conditioner
Frigidaire FAX054P7A4 Frigidaire/air Conditioner
Frigidaire FAX054P7A5 Frigidaire/air Conditioner
Frigidaire FAX054P7A6 Frigidaire/air Conditioner
Frigidaire FAX054P7AA ROOM A/C
Frigidaire FAX054P7AB ROOM A/C
Frigidaire FAX054P7AC ROOM A/C
Frigidaire FAX054P7AD ROOM A/C
Frigidaire FAX054P7AENG1 Frigidaire/air Conditioner
Frigidaire FAX054P7AENG2 Frigidaire/air Conditioner
Frigidaire FAX054P7AENG3 Frigidaire/air Conditioner
Frigidaire FAX054P7AENG4 Frigidaire/air Conditioner
Frigidaire FAX054P7AENG5 Frigidaire/air Conditioner
Frigidaire FAX054P7AENG6 Frigidaire/air Conditioner
Frigidaire FAZ085S1AA ROOM A/C
Frigidaire FAZ085S1AB ROOM A/C
Frigidaire FAZ085S7AA ROOM A/C
Frigidaire FAZ085S7AB ROOM A/C
Frigidaire FAZ08ES1AA ROOM A/C
Frigidaire FAZ08ES1AB ROOM A/C
Frigidaire FAZ08HR1A1 Frigidaire/air Conditioner
Frigidaire FAZ08HS1A11 ROOM AIR CONDITIONER
Frigidaire FAZ08HS1A12 ROOM AIR CONDITIONER
Frigidaire FAZ08HS1A13 ROOM AIR CONDITIONER
Frigidaire FAZ08HS1A14 ROOM AIR CONDITIONER
Frigidaire FAZ08HS1A15 ROOM AIR CONDITIONER
Frigidaire FAZ08HS1A16 ROOM AIR CONDITIONER
Frigidaire FAZ08HS1AA ROOM AIR CONDITIONER
Frigidaire FAZ08HS1AB ROOM AIR CONDITIONER
Frigidaire FAZ105S1AA ROOM A/C
Frigidaire FAZ105S1AB ROOM A/C
Frigidaire FAZ125S1AA ROOM A/C
Frigidaire FAZ125S1AB ROOM A/C
Frigidaire FAZ12ES2AA ROOM A/C
Frigidaire FAZ12ES2AB ROOM A/C
Frigidaire FAZ12HR2A2 Frigidaire/air Conditioner
Frigidaire FAZ12HS2A11 ROOM AIR CONDITIONER
Frigidaire FAZ12HS2A12 ROOM AIR CONDITIONER
Frigidaire FAZ12HS2A13 ROOM AIR CONDITIONER
Frigidaire FAZ12HS2AA ROOM AIR CONDITIONER
Frigidaire FAZ12HS2AB ROOM AIR CONDITIONER
Maytag FB10 DISPOSAL
Maytag FB11 DISPOSAL
Maytag FB20 DISPOSAL
Maytag FB21 DISPOSAL
Amana FB2221N WASHER-TOP LOADING
Amana FB7111N WASHER-TOP LOADING
Amana FB7221N WASHER-TOP LOADING
Whirlpool FB7700XR0 Floor care*
Whirlpool FB7700XS0 Floor care*
Whirlpool FB7700XS1 Floor care*
Whirlpool FB9900XR0 Floor care*
Whirlpool FB9900XS0 Floor care*
Frigidaire FBD2400KB0 DISHWASHER
Reply With Quote
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
  #2 (permalink)  
Old 11-30-2009, 01:49 PM
Gene's Avatar
Senior Expert
APP Volunteer
 
Join Date: Jul 2007
Location: Orange County, California
Posts: 27,171
Gene has a brilliant futureGene has a brilliant future
Default

Test the lid lock as described in the Service manual. If there is nothing wrong, replace the control board.

- The lid lock assembly (r.h.) Part number: AP4035314

Part number: AP4035314



- The magnet Part number: AP4035308

Part number: AP4035308



- The lid lock assembly (l.h.) Part number: AP4033944

Part number: AP4033944



- The control board Part number: AP4034182

Part number: AP4034182



Here are the breakdown diagrams and Replacement parts for MAYTAG FAV6800AWW Washer - Top Loading | AppliancePartsPros.com

Gene.
__________________
Appliance Repair Expert in Orange County, California.

Order Appliance Parts with 365-Day Hassle Free Return Policy - AppliancePartsPros.com
Reply With Quote
  #3 (permalink)  
Old 11-30-2009, 05:25 PM
Senior Member
 
Join Date: Mar 2009
Posts: 443
dh1200s is on a distinguished road
Default

Quote:
Originally Posted by Curiouscleaner View Post
The OD code continues to display after unplugging. Ran the service test but does not show anything but "OD" no other codes. Is it a sure bet that the control board is bad or would it have to due with the Magnetic closers? I do not wish to just replace board if their is an underlying cause. The board shows no signs of burn components. Read the repair manual but found no reference to this specific issue. Any help would be greatly appreciated.

What I would do is remove the Left Lid Lock and very carefully open it up. See page 34 of the Service Manual for removal steps. Once you have the Left Lid Lock in your hand you need to open up the case halves.

I found it is very easy to break off the enclosure locking tabs. I use a fine flat jewelers screw driver and X-acto blade and work around the locking tabs to open the case halves. I wedge small paper clip ends or tooth picks in the case halves as I work around the tabs. Once the case halves are open I believe you will find corrosion issues such as seen in my pic’s.

You can clean up the corrosion with WD-40 and finger nail emery boards.

I believe you will find the black lead has broken loose from one end of the magnetic reed relay. It can be soldered back on. If you don’t want to deal with that you can order a replacement Left Hand Lid Lock from this site. OD is caused by Loss of 12VDC signaling from the Cotrol Board thru the magnetic reed relay back to Conn_P3 Pin 9 "Lid is Closed" On the Control Board..... Rich
Attached Images
File Type: jpg Corrision Left Lid Lock FL&LO Error.JPG (23.6 KB, 127 views)
Reply With Quote
  #4 (permalink)  
Old 12-01-2009, 08:06 AM
Junior Member
 
Join Date: Nov 2009
Posts: 3
Curiouscleaner is on a distinguished road
Smile

Rich
Took apart as per your directions. Very little corrosion & no broken leads. Cleaned the sliding contacts anyway, moved it back and forth dozen times or so, cleaned the outside pins that receive the wiring harness and put it back in machine. Still would not work.
Then took a larger magnet that I have and with lid open placed on top rim and tryed to turn on washer. It came up with no error. Removed my magnet, closed lid and I am now washing my first load.
Question- do the original magnets loose their strength over time, washer is about 5 years old. Maybe I should order a new lid lock just to have in reserve.
Thank you for your guidance. I called and left message for Maytag authorized repair last Friday and still have not even gotten a call from them.
Gene thank you for this resource, I will order my back up switch from you to be safe.
Reply With Quote
  #5 (permalink)  
Old 12-01-2009, 09:27 AM
Senior Member
 
Join Date: Mar 2009
Posts: 443
dh1200s is on a distinguished road
Default

Curiouscleaner,

Your L.H. Lid lock sounds in great shape from what most owners experience in terms of corrosion. I would not spend the money right now but that’s me. You can get quick turnaround from this site if you need to replace down the road, I just clean them up as you did. I think you saved yourself a nice chunk change with your DIY fix… good job! What series is your machine? The series is the 1st two digits of your serial number. I have a soft copy of schematics for the Series if you need. It’s a little easier for me to navigate around on the .PDF schematic on the laptop when troubleshooting.

Start a spin only cycle with the lid open you should error out with an “OP” error to the display. Now close the lid and error should clear. Try a few times and see if the “OP” error code clears repeatedly.
The left side lid magnet operates the magnetic reed relay you saw in the lid lock. Depending on where in the wash cycle the +12VDC signaling became lost to the Control Board will determine the Control Board error code “OP” or ”OD”.

You can check out the Lid Magnet position under the inner panel of the lid. Follow the SM for inner lid panel removal and make sure the magnet in seated in the holder. Other tip I would never replace the right lid lock if it fails but that’s your call. Only the L.H. Lid Lock is required for the machine to operate as designed with it’s dual signaling function, lid is open/closed and lid is locked/unlocked.

Are you the original owner of the machine? If so have you had a Clutch malfunction (dry/sticky One-Way Roller clutches) resulting with dC/uC unbalance error codes? I have a clutch maintenance/repair process that will help DIY owners of these TL machine models. The L.H. Lid Lock and Clutch malfunctions send many FAV6800A/FAV9800A machines to an early grave. As you did you can make this machine last longer than it’s high MTBF with maintenance for issues such as these.

Post back if I can help with any machine issue. Only thing I haven’t worked on is an Outer Tub bearing replacement. I have a machine that's about ready for that….. Rich
Reply With Quote
  #6 (permalink)  
Old 12-04-2009, 06:30 AM
Junior Member
 
Join Date: Nov 2009
Posts: 3
Curiouscleaner is on a distinguished road
Default

Yes original owner. This is the first issue with the unit. Still working fine after the cleaning. Serial #last 5 #'s 85148EE. It has now been 7 days and no call from the Maytag repair folks. It's fishing time on the Outer Banks, wish I were there, that must be where they are at. I'm on my way to the beach now so have a good weekend.
Reply With Quote
  #7 (permalink)  
Old 12-04-2009, 07:28 AM
Senior Member
 
Join Date: Mar 2009
Posts: 443
dh1200s is on a distinguished road
Default

Forget Maytag repair you sound like you can handle any repair on the FAV6800A. Get the Service Manual Gene linked you to from servicematters.com and order any parts you need from this site. Always troubleshoot before ordering parts as you did.

“”The series is the 1st two digits of your serial number”” would just give me some insight to the Clutch assembly in your machine as to whether or not your machine used the Upper One-Way Roller Clutch bearing. I put this out because this is the number one issue with the FAV6800A & FAV9800A machines. If you haven’t had dC/uC unbalance errors caused the One-Way Roller clutches in the clutch pulley in the past you will down the road. I have a write up to remove the clutch and determine if you can clean up and re-lube or need to replace the clutch assembly. A clutch replacement service call will cost you around $300.

A One-Way roller clutch clean up/re-lube would be the cost of a can of WD-40 and Slick 50 One Lube. The first check is to do the TDS thru the lid check that is in the SM.


10-4 on the Outer Banks, we go down every summer, we really enjoy the area.
Reply With Quote
  #8 (permalink)  
Old 07-15-2013, 09:54 PM
Junior Member
 
Join Date: Jul 2013
Posts: 1
tomas_gnzlz is on a distinguished road
Default

I followed this guys steps and also i must add i didn't have a broken black wire. i just simply cleaned the corrosion and i also slightly bent the upper contact for the two sliders that send the signal for door locked.
thanks a bunch..
Quote:
Originally Posted by dh1200s View Post
What I would do is remove the Left Lid Lock and very carefully open it up. See page 34 of the Service Manual for removal steps. Once you have the Left Lid Lock in your hand you need to open up the case halves.

I found it is very easy to break off the enclosure locking tabs. I use a fine flat jewelers screw driver and X-acto blade and work around the locking tabs to open the case halves. I wedge small paper clip ends or tooth picks in the case halves as I work around the tabs. Once the case halves are open I believe you will find corrosion issues such as seen in my pic’s.

You can clean up the corrosion with WD-40 and finger nail emery boards.

I believe you will find the black lead has broken loose from one end of the magnetic reed relay. It can be soldered back on. If you don’t want to deal with that you can order a replacement Left Hand Lid Lock from this site. OD is caused by Loss of 12VDC signaling from the Cotrol Board thru the magnetic reed relay back to Conn_P3 Pin 9 "Lid is Closed" On the Control Board..... Rich


Reply With Quote
  #9 (permalink)  
Old 07-16-2013, 07:47 AM
Senior Member
 
Join Date: Mar 2009
Posts: 443
dh1200s is on a distinguished road
Default

Glad it worked out for you.....that bleach dispenser is hard on the contacts in that left hand lid lock.........great work..........Dick
Reply With Quote
  #10 (permalink)  
Old 06-12-2014, 10:15 AM
Junior Member
 
Join Date: Jun 2014
Posts: 2
eeigelberger is on a distinguished road
Default maytag "od" repair

Thank you for the information. I was able to follow the steps and fix the "od" problem. Thanks again.
Reply With Quote
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
maytag neptune code 8.8. kkenemer@comcast.net Dryer Repair 6 04-14-2014 02:13 PM
Maytag Neptune TL - nd (will not drain code) ApplWarrior Washer Repair 1 05-12-2009 03:41 PM
Maytag Neptune NF Code magaluke Washer Repair 1 01-27-2009 03:12 PM
Maytag Neptune LR code dspen01 Washer Repair 0 06-23-2008 02:36 PM
Maytag Neptune LR code sonny_p Dishwasher Repair 8 02-29-2008 11:17 AM



All times are GMT -7. The time now is 05:54 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17