Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
rayboy  
#1 Posted : Sunday, November 29, 2009 3:25:10 PM(UTC)
Quote
rayboy

Rank: Member

Groups: Registered
Joined: 11/29/2009(UTC)
Posts: 3

I'm trying to help out an elderly neighbor with his washing machine.
The machine refuses to spin and drain unless I hold down the lid switch with a screw driver. The plastic part on the lid that depresses the lid switch dosen't do it's job. Why does it work when I use a screw driver but not when the lid is down? It does go through the wash cycle with the lid closed but when it gets to the spin cycle it stops.
Would appreciste any feed back.

Rayboy
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Sunday, November 29, 2009 3:40:57 PM(UTC)
Quote
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Hi Rayboy

The lid switch mechanism is broken, so that plastic lip that the plunger on the lid pushes to activate the switch is not moving enough to close the lid switch. When you insert the screw driver you are moving it more than the plastic plunger does, so it drains and spins.

Replace the lid switch and the machine should be up and running and you can congratulate yourself on being a really nice person to help your neighbor. Here is the part.

Part number: AP3094500
Part number: AP3094500


and here is site that will show you how to get the cabinet off to do it. Your model number is coming up as a Whirlpool, so I assume that is what you have.

Kenmore top loader blues (SublimeMasterJW's Appliance Advice)
rayboy  
#3 Posted : Sunday, November 29, 2009 4:34:45 PM(UTC)
Quote
rayboy

Rank: Member

Groups: Registered
Joined: 11/29/2009(UTC)
Posts: 3

Originally Posted by: sidfink43 Go to Quoted Post
Hi Rayboy

The lid switch mechanism is broken, so that plastic lip that the plunger on the lid pushes to activate the switch is not moving enough to close the lid switch. When you insert the screw driver you are moving it more than the plastic plunger does, so it drains and spins.

Replace the lid switch and the machine should be up and running and you can congratulate yourself on being a really nice person to help your neighbor. Here is the part.

Part number: AP3094500
Part number: AP3094500


and here is site that will show you how to get the cabinet off to do it. Your model number is coming up as a Whirlpool, so I assume that is what you have.

Kenmore top loader blues (SublimeMasterJW's Appliance Advice)


Congratulations go to you all for such quick and thorough replies. I very much appreciate it and I'll see what I can do! BTW: It is a whirlpool washer.
rayboy  
#4 Posted : Tuesday, December 1, 2009 6:54:52 AM(UTC)
Quote
rayboy

Rank: Member

Groups: Registered
Joined: 11/29/2009(UTC)
Posts: 3

Sid,
It took less than an hour to make the repairs on this machine. Not bad for a novice repairman like me, lol.
Your instructions were easy to follow and my neighbors are happy. I might add, my neighbors are in their late 80's so you can imagine how dependent they have to be sometime and were most grateful for your help.
sidfink43  
#5 Posted : Tuesday, December 1, 2009 12:51:42 PM(UTC)
Quote
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Well, sounds like you did all the work, nice going, glad you were able to help them out and thanks for the update.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Washing Machine Lid Switch (Washer Repair)
by EEE 5/5/2008 7:04:30 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.