Rank: Member
Groups: Registered
Joined: 11/29/2009(UTC) Posts: 1
|
We disconnected washer to do some remodeling and when we connected the water lines the hot water will not fill into the washer. We have cleaned the screens and the line. Is there some type of value that closes and will not let the water come through. The cold water line is working.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
The water valve that lets in the cold water has probably stop working. Disconnect the wiring to the cold water valve and test to see if you 120v coming to it when it is supposed to be filling with cold water. If so, replace the valve assembly. Here is the part. Part number: AP4026239
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close