Rank: Member
Groups: Registered
Joined: 11/6/2009(UTC) Posts: 1
|
Our washer is working except that it has started to buzz during aggitation cycles. It does not do it all the time and it hasn't interfered with any of the cylces. I read a post that sounded similar and it was a tooth in the pump, but the video link was down and it was not the same washer. Could this be our problem as well (unlikly it is a tooth, but I can imagin other small things could have made their way in :) )? I have never done anything handy with the washer before, so any tips would be very helpful! Thanks!
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC) Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
You may have a tranny coupler ready to fail. I would pull the outer cover off the washer and check where the noise is comming from.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close