I NEED HELP PLEASE!! My washer was making a loud noise during the spin cycle. I researched and found likely cause to be the Tub bearing. When I disassembled the washer I noticed that the Shifter assembly bearing was actually the root case. I ordered the shift assembly, tub bearing and seals. After replacing these components, my washer would no longer spin or agitate. I performed electrical tests and seen no led blinking on motor/invertor assembly. I checked the fusible link and it was good, I also checked the continuity of the lid switch at the motor connector and it has continuity when closed and goes open when the lid is up. After further checks, the most likely case was a failed motor/inverter, so I replaced it with a new one and still does not spin or agitate. I also replaced the belt while I was there. I now have so much money tied up in this machine and have no idea why it isn't working. I have 120V to the motor/invertor. What could be the issue. Please advise.