Fisher & Paykel Wobble after replacing Suspension Rods
Model Number: WL26CW1 Brand:
5 - 10 years
I recently had my Fisher & Paykel WL26CW1 washer begin to violently shake during the spin cycle until it error-ed and requested that I re-balance the load. After doing some research I replaced the suspension rods and rubber hangers and re-balanced the feet of the washer.
I still seem to be having trouble though, the tube seems to be drifting about a 1/4 of an inch to the back right of the washer unless I exaggeratedly tilt the washer in the opposite direction. Once the tube gets up to speed during the spin cycle, it begins to wobble and give a low thumping sound like the washer is lightly out of balance, but the outside of the washer does not shake more than normal. I have tried running it tilted so that drum it perfectly centered and swapping locations of the suspension rods with the same results.
Thank You guys and gals in advance for any help that you can provided for me!