Whirlpool won't start test #3a
Model Number: WTW4950XW0 Brand:
1 - 5 years
I have a Whirlpool washer that won't start. When the start button is pushed the lid lock comes on and off and it makes a sound but not the sound it used to make. The lid lock will start flashing and nothing else happens. When it first stopped working it was during a wash cycle and I had a load of soaked clothing in it. I diagnosed it both by the sheet and info I have found on the web. The shifter motor was replaced but that didn't help. The error code I am getting is F7E1. The lid lock was tested and it works fine. All of the other steps in the chart work until I try to shift between spin and agitate modes Test 3a step 8
When checking high spin in manual test mode it get 120 VAC then zero volts and then nothing. All lights start to flash but the green lights flash opposite the lid lock light. Switchhing to other modes in manual test makes all of the green lights flash.
Last edited by gkbiv : 04-29-2017 at 08:37 PM.
Reason: Addede error code.