Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
Maytag Neptune Control Panel
Options
Go to last post Go to first unread
Model: MAH5500BWW Brand: Maytag Age: More than 10 years
Previous Topic Next Topic
DariaGile  
#1 Posted : Saturday, November 7, 2015 6:58:46 AM(UTC)
Quote
DariaGile

Rank: Member

Groups: Registered
Joined: 11/7/2015(UTC)
Posts: 1
My Neptune WM control panel was frozen with a cycle time of 66 and the on/off switch was blinking. I went through the diagnostics pressing "delicates"&"heavy soil" then got a PA on the service cycle test. (pass) but I am unable to perform any other test. The control panel buttons do not respond. I tried to reset by unplugging the wiring harness and reconnecting everything but the control panel is still not responding except for the diagnostic service cycle.

Any thoughts? Is the control panel and motor board bad? Any other tests that I can try to confirm before I start shopping for a new washing machine?

Thanks
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
sidfink43  
#2 Posted : Sunday, November 8, 2015 4:18:51 PM(UTC)
Quote
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
If you have ten plus years out of a Neptune you have done very well and I suggest you celebrate by replacing it with a basic top loader with no electronics.
Back to top
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET