Washer Repair

tantheman · #1 (**permalink**) 10-27-2009, 12:10 PM

The washer stopped in the middle of the drain cycle with a clicking sound. Went and unplugged the washer powered down and back up, changed the dial to drain and spin. Washer started to drain for a couple of seconds then started the clicking again. Any ideas as to the problem?

sidfink43 · #2 (**permalink**) 10-28-2009, 01:21 PM

Well, if we were there with you we would put the machine into test mode and see if we could learn anything. Since we are not there we recommend that you do this.

Here is a service manual for your machine which will tell you how, and how to interpret the results if it will enter test mode.

https://secured.whirlpool.com/Servic...LE/8178583.pdf

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
clicking sound, continuous cycle	jondelneg	Dishwasher Repair	2	09-04-2009 06:48 AM
clicking sound, continueing cycle	jondelneg	Washer Repair	2	09-03-2009 01:16 PM
Maytag Neptune Makes Clicking Sound During Wash Cycle	dkaudio	Washer Repair	2	05-31-2009 05:42 AM
washer makes clicking sound and now won't spin at all	LKelly	Washer Repair	2	10-25-2008 07:36 PM
GE washer makes clicking sound	Kyle	Washer Repair	5	01-13-2008 02:41 AM

Washer stopped in drain cycle with a clicking sound.

Washer Repair

The washer stopped in the middle of the drain cycle with a clicking sound. Went and unplugged the washer powered