Rank: Member
Groups: Registered
Joined: 3/24/2014(UTC) Posts: 2
|
Just picked up a used washer that was complaining about the F20 code. I was lucky and found a loose wire at one of the fill valve solenoids. PS, that is even after a company called "Appliance Doctor" told the original owner that the logic board was fried...
The issue I have now, is setting the price to pay. The initial setting of 7 quarters (6.07) shows the $1.75 required at the start of a new cycle, but I only need to put in a loony and then a quarter to get the cycle to start. I am hoping that someone knows how to program it to accept a loony and 3 quarters or 7 quarters before the cycle starts?
I have a basic service manual that came with the machine. Is there a better manual that gets into more programing?
Thank you to the person(s) that can help me with this, it is driving me crazy.
Coves
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/24/2014(UTC) Posts: 2
|
Just bumping, hoping someone has some experience with this issue
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close