Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
ppowers  
#1 Posted : Saturday, December 28, 2013 8:47:35 AM(UTC)
Quote
ppowers

Rank: Member

Groups: Registered
Joined: 12/28/2013(UTC)
Posts: 1

our washer is 5 years old , when it fills at the start the adjator is working( it never has before)it usually starts after the water is full
and it doesn’t fill to the right water level , at the end it spins out then starts filling again with water then shuts off leaving the cloths in water (very wet)
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
fairbank56  
#2 Posted : Saturday, December 28, 2013 9:34:47 AM(UTC)
Quote
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Open the control panel and unplug the hose from the fabric softener switch. Blow through hose to make sure its clear. Reconnect and try washer again. If it still doesn't work right, replace the switch.

Whirlpool W10292584 Switch-Sen - AppliancePartsPros.com

Eric
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.