Rank: Member
Groups: Registered
Joined: 10/4/2009(UTC) Posts: 1
|
I have a maytag front load washer. What happens when machine is running it stops and flashes the letters "F" and 'H'. This happens sometimes in the wash cycle, but most of the time in the rinse cycle. I have already replaced the water levelpressure switch. This did not resolve the problem.:confused: Can you help me with this problem!
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
Here is the tech sheet on your machine. I would
1. Check the drains and the pump.
2. Run the machine through the diagnostic routines.
If these do not help a possible source of your problem is the flowmeter.
Good luck, and let us know what you find out.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close