Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
jjbee  
#1 Posted : Tuesday, March 12, 2013 11:38:35 AM(UTC)
Quote
jjbee

Rank: Member

Groups: Registered
Joined: 3/12/2013(UTC)
Posts: 1

I have a GE Profile washer (top loader) that has no power. I verified the outlet is good and so is the power cord. The start button usually displays the amout of time or a zero but now I have nothing. If I unplug the washer for a few minutes and then plug it back in, I hear a little click under the backsplash. That makes me think that power is attempting to get to the control panel and that is where the failure lies. Is there a way to determine if the control panel is getting power? Is there a way to determine if the cause is somewhere else? Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Simon / APP Team  
#2 Posted : Tuesday, March 12, 2013 5:22:56 PM(UTC)
Quote
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Hi.

Get access to the control board.
Locate 2pin plug with RB wire and 10 pin plug with WR wire. With washer plugged in check for 120VAC between this two wires.
If proper voltage present - replace the main control board.

Part number: AP5331956
Part number: AP5331956


Here are the breakdown diagrams and Controls & Backsplash parts for GE WPRE6150K1WT - AppliancePartsPros.com

Post the results.

Simon.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.