|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Ge Washer |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
02-09-2013, 09:23 AM
|
|||
|
|||
Ge Washer
Model Number: WJSR416OG2 Brand: GE Age: 5 - 10 years
Washer Will Fill With Water But Will Not Agitate Or Spin, Just Makes Humming Sound..then After 1 Minute It Will Drain..i Replaced The Agitator Coupling Kit..but Didn't Fix It...what Next?
Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
02-10-2013, 01:54 PM
|
|||
|
|||
|
Is the timer dial moving while it's filling?
Eric
|
|
02-11-2013, 10:29 AM
|
|||
|
|||
|
It's not supposed to move while filling. You may have a bad timer but I would check the inverter for error codes as well. Remove the front panel and check the flashing LED on the inverter board on top of the motor. With the washer in standby, it should be flashing on/off every second and with the washer running it should be on/off every 1/2 second. If there is an error code, it will flash the error number such as 4 quick flashes and then off within a 6 second period is error code 4.
Eric
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
