Rank: Member
Groups: Registered
Joined: 2/5/2013(UTC) Posts: 3
|
Washer will not dispense fabric softener or bleach, soap works fine. Replaced dispenser thinking there was something broken inside, as the little motor works and seems to hit all 4 positions shown on the dispenser. Any ideas? Thanks, Ken
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
I am not sure which part you replaced. That are valves which open up to allow the water entering the machine to go through the various troughs. If they are not they could be the problem, but more likely it is the control unit which is supposed to tell them to open and is not doing so.
If you want to and understand the process you could use a jumper wire to put current to the valves to see if they open.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/5/2013(UTC) Posts: 3
|
Found the problem in the inlet valve filling too slow. Replaced the valve and problem solved.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close