[clavin29]

i have a whirlpool deut front loader that keeps stopping. sometimes it will go a full cycle, but usually not. sometimes will just stop once, you can restart and will finish cycle fine. sometimes multiple stops. wahser is level. no codes, all lights flash and min remaining is flashing when stopped. recetly put a new door hinge on and stopping instances seemed to increase. Door latch and swithch are fine. Suggestions??

[sidfink43]

I know you say the door lock assembly is fine, but it seems like one cause might be the door lock assembly shorting out.

Also, you should find some tech notes under the top, so if you get them you can put the machine into test mode and run some diagnostics. You can also use the notes to test the two control boards.