Rank: Member
Groups: Registered
Joined: 2/1/2013(UTC) Posts: 3
|
My washer stop operating completely at the end of the wash portion of all cycles, it will not drain or spin. It's like a power failure has occured. The lid switch tested good but bypassed it to make sure and still nothing after the agitation stops. Could the timer (P/N 131856400E) be the problem?
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC) Posts: 5,556
|
Hi. Check the drain pump and drain hoses for any restriction. Check if the pump gets 120VAC. Part number: 137108100
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/1/2013(UTC) Posts: 3
|
Originally Posted by: Simon / APP Team Hi. Check the drain pump and drain hoses for any restriction. Check if the pump gets 120VAC. Part number: 137108100
thanks Simon, I do not have any AC voltage going to the drain pump. I can hear the timer clicking for about 1 minute after the agitator stops, then dead silence.
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC) Posts: 5,556
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/1/2013(UTC) Posts: 3
|
Originally Posted by: Simon / APP Team Hi Simon, you have confirmed my trouble shooting, thanks for the help. Do you have a discount coupon to use on a parts order?
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC) Posts: 5,556
|
I don't think so, but you can check with our parts department.
Simon.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close