Washer Repair

bgblue1978 · #1 (**permalink**) 01-08-2013, 07:49 AM

i have a duet ht that was flashing f70. repair guy said bad ccu so i decided to do some more research. found forums talking about bad connections so i removed the plugs and re installed and it worked for a few weeks. now it won't turn on. i get 3 beeps when i push power and nothing on the screen. i'm getting 120v to the ccu and have tried to wiggle the connections on the ccu. also looked around for broken wires because i read a few people have that problem but couldnt find any. i do hear the click from the ccu when i plug it in so i don't think the board is bad? uggestions??

sidfink43 · #2 (**permalink**) 01-10-2013, 05:51 PM

I would try replacing the main board. It may be a connection problem but if the connection problem is with the board you will have to replace the board to fix it.

If you buy from this site and the new board does not fix things you can return it.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Whirlpool Duet wont turn on	boonvillebob	Washer Repair	3	12-13-2011 06:23 PM
Whirlpool Duet Dryer won't turn	lookinup	Dryer Repair	0	08-08-2011 08:14 PM
Whirlpool Duet Washer won't turn on	tommyhal	Dishwasher Repair	9	08-04-2010 05:04 PM
Whirlpool Duet Washer won't turn on	tommyhal	Washer Repair	6	07-14-2010 04:33 AM
Duet wont turn on	Jessica C	Dishwasher Repair	1	02-14-2009 06:53 AM

duet won't turn on

Washer Repair

i have a duet ht that was flashing f70. repair guy said bad ccu so i decided to do some