Washer Repair

sparky02 · #1 (**permalink**) 11-26-2012, 01:48 PM

This washer has some water coming out of plastic flood or overflow tube during wash and rinse cycle. Water level is OK and fill valves fine.
The inner stainless tub moves during these cycles.
Is that normal for the stainless tub to move.
I thought this may be causing the water slop out the tube located in back left corner of tub.

fairbank56 · #2 (**permalink**) 11-26-2012, 03:48 PM

It's normal for it to move a very little bit but if it's moving in sync with the agitator like it's agitating, then the mode shifter is not working.

Eric

sparky02 · #3 (**permalink**) 11-27-2012, 07:31 AM

Quote:

Originally Posted by fairbank56

It's normal for it to move a very little bit but if it's moving in sync with the agitator like it's agitating, then the mode shifter is not working.

Eric

Thank Eric for you good help will look@ that!
Last night i found out from wife water comes out flood hose only when set to largest load capacity and Stainless tub does move just like the agitator!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
gurguling noise coming from drain tube	dumbpeter	Refrigerator & Freezer Repair	0	08-28-2012 07:00 PM
Overflow tube	Shadtree	Washer Repair	0	08-05-2012 11:37 AM
Water coming out of flood hose...Help	DOITMYSELF2012	Washer Repair	5	07-25-2012 10:07 AM
washing machine flood tube leak	macadotious	Washer Repair	11	11-04-2010 05:25 AM
warer leaking down overflow float tube	ardonato@msn.com	Dishwasher Repair	0	01-23-2008 04:10 PM

Water coming out overflow (flood tube)

Washer Repair

This washer has some water coming out of plastic flood or overflow tube during wash and rinse cycle. Water level