Washer Repair

Roger Buttram · #1 (**permalink**) 11-09-2012, 04:26 PM

I installed a new timer on my maytag washer that was stopping in the middle of a cycle, which you could turn the timer off and back on and it would complete the cycle, I assumed it had to be the timer so I replaced it now the new timer works only on spin cycle it wont put any water in in any cycle. HELP

sidfink43 · #2 (**permalink**) 11-11-2012, 05:19 PM

Your original problem does sound like the timer, so the new one should have fixed things.

The first thing to do is to check the connectors. I would take the connectors off, check for any bent or damaged pins, clean everything with a good contact cleaner and then reseat the connectors.

If that does not fix it, check the wiring that goes to the water level switch, and the water level switch itself.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GE hydrowave wbsr3140g0ww top load: Timer knob and timer not in sync	katwoman	Washer Repair	2	04-19-2013 02:13 PM
Washer timer motor in timer assembly	marinekilz	Washer Repair	2	10-31-2011 06:14 PM
Maytag washer, timer good till rinse-no spin,drain orstop/timer keeps clicking freely	partsparts	Washer Repair	3	08-23-2010 01:50 AM
Kenmore Dryer Timer not advancing in Auto Dry or Timer Mode but it does heat and dry	dspeidel	Dryer Repair	6	08-25-2009 02:23 PM
GE Top Loader--Problem with Timer Knob or Timer	crmothorpe	Washer Repair	3	04-27-2009 06:08 AM