Rank: Member
Groups: Registered
Joined: 10/31/2012(UTC) Posts: 2
|
The tech sheet (I was told) was suppose to be in a plastic bag behind the lower panel. The plastic bag was empty. I found a tech sheet for the WFW9200SQA12 but I need a tech sheet for WFW9400SW03
I have a F11 error code, and I know it is a communication error between the Motor Control Board and the Central Control Unit. I have checked all the wiring and cleaned all the connections. My understanding is that the tech sheet will give diagnostic information to check for voltages and such to determine what board it actually is. They are really expensive, so don't want to replace what doesn't need to be replaced.
Thank you so much!
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
The "F11" error code means "Motor control unit error". Per the instructions (definitely not the best one) from the tech sheet (attached to the post) the problem can be a bad motor or a bad MCU. - The motor Part number: 8182793
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/31/2012(UTC) Posts: 2
|
Thanks! I will take a look. Appreciate your help:)
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
You are welcome. Keep us posted.
Gene.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close